Workshop Charger

  • CTEK Analyser

    The CTEK Analyser is manufactured by Midtronics which are highly regarded as the worlds best algorithm for performing a conductance test on batteries to ascertain the health of a battery. The units are self-powered by the battery they are testing and show a calculated CCA rating which you check against the manufacturer's spec. If the value is 80% or lower of new then it is deemed end of life. This type of tester isn't suitable for testing Ah capacity of batteries which is needed to confirm a deep cycle batteries reserve power output.

  • MXS 10

    Powerful professional charging for workshops

    The ultimate charger

    The MXS 10 gives you state of the art technology and is ideal for professional use in workshops for caravan, RV, boat and car batteries with remote temp. sensor and power supply mode.

    The MXS 10 is a fully automatic 8-step charger that delivers 10A to all types of 12V batteries from 20-200Ah and is also suitable for maintenance charging up to 300Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning sulphated and deeply discharged batteries, a winter program for charging in cold weather which is also the AGM option which maximises the performance life of most Stop/Start batteries. The MXS 10 also has a temperature sensor for optimised charging and it can even be used as a power supply source for 12V equipment.

    • Fully automatic ‘connect and forget’ 8 step charging
    • Charges batteries from 20-200Ah
    • Temperature sensor, AGM and Recond programs
    • Power supply for 12V equipment
    • 2-year warranty
  • MXS 15

    Master in the middle

    Midsized Maintainer, service support and conditioner

    The CTEK MXS 15 with its Recond Mode, Power Supply and 8 stage charging cycle is ideal for large vehicle workshops, motorhomes and battery banks between the 150Ah to 300Ah. The unit comes with a 2 year warranty and is IP44 rated with an internal fan for cooling.

    If you use for extended periods of time a surge protector would be an ideal Christmas stocking gift to ensure a surge or dimming of power didn't damage the sensitive equipment.

  • MXS 25

    Large power large features small size

    When smarter is better and a faster charge

    The MXS 25 is the largest professional charger suitable for motorhome or marine. It has user selected modes for normal charging, power supply mode, recondition mode which will stay in the selected mode each time the charger is reconnected to AC mains so no user intervention is required. The unit comes with temp. compensated charging which is good to stop a battery from over-charging in high heat conditions and importantly raising the charging voltage in freezing conditions so the battery achieves full charge in temperatures just above freezing. The charger is IP44 rated and includes a cross ventilation fan so keep it free of obstruction to ensure the fan isn't on for longer than necessary. The 8 stages of charge ensure the battery is kept fully charged and maintained for up to a year without needing attention.

  • MXS 25EC

    Workshop Extended Cables

    Leads to workshop lead times reduced

    The MXS 25EC (Extended Cables) has the same feature at the MXS 25 but with 6 metre long DC power leads so you can place the charger on the drivers or passengers window using the window mounting bracket that's also provided with the charger.

    The power supply mode means you can program the ECU at a dealership without a reduction in voltage triggering alerts. All inportant when errors are costly and time is money.

  • MXT 14

    Professional 24V battery charging

    The ideal 24V solution

    The MXT 14 is designed for batteries that are put under a lot of strain, making it ideal for commercial vehicles, buses, trucks, access equipment and workshops.

    The MXT 14 professional 8 step 24V battery charger delivers 14A to 24V batteries from 28-300Ah and is suitable for maintenance charging up to 500Ah. Its features include battery diagnosis to establish whether the battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, and a built in temperature sensor for optimised charging regardless of weather conditions. The MXT 14 also has a ‘Supply’ mode so it can be used as a 24V power source.

    • Charges 24V batteries from 28-300Ah
    • Recond program
    • Temperature sensor to compensate for cold conditions
    • Can be used as a 24V power source
    • IP44 classified for outdoor use
    • Fully automatic ‘connect and forget’ 8 step charging
    • Patented maintenance charging up to 500Ah
    • Easy to read LED display
    • Safe spark free operation
    • Reverse polarity protected
    • Short circuit proof
    • 2-year warranty
  • MXTS 40

    The all in one 12V and 24V charging station

    Fast, multi functional charging

    The MXTS 40 is the all in one battery charging, maintenance and support station that’s essential equipment for 12V and 24V vehicle workshops and showrooms. It’s easy to use and electronically safe, with rapid charging for all types of batteries.

    The MXTS 40 has both 40A/12V and 20A/24V output, and provides selectable constant voltage settings to avoid ECU damage due to voltage fluctuation during programming. As well as the 8 step charge progress display, the MXTS 40 also has an easy to read OLED display to give you clear readouts of key charge parameters, including current, voltage and amps charged. It has a Recond mode for reconditioning deeply discharged batteries and a temperature sensor for optimised charging regardless of weather conditions. The MXTS 40 has been designed to protect vehicle electronics and is housed in heavy duty polycarbonate for rough environments. It can be used with the optional Wall Hanger Pro and Trolley Pro for secure storage and maximum portability.

    • Charges 12V batteries from 20-1200Ah and Charges 24V batteries from 10 – 600Ah
    • Recond Mode for sulphated battery repair
    • Temperature sensor to compensate for cold conditions
    • Easy to read OLED display
    • Comes with heavy duty clamps and high quality detachable 2.5m charge cables
    • Electronically safe multi step rapid charging
    • 40A/12V and 20A/24V output
    • IP20 classified
    • Safe spark free operation
    • Reverse polarity protected
    • Short circuit proof
    • 2-year warranty
  • MXTS 70/50

    Versatile and Powerful workshop charger

    Powerful charging

    The MXTS 70/50 is a powerful, state of the art workshop charger developed specifically for all 12V and 24V lead acid batteries, including AGM and EFB Stop/Start types.

    The MXTS 70/50 is a fully automatic 8 step charger that delivers selectable 50A/12V or 50A/24V to batteries from 20-1,500Ah (for 12V) and 20-1,500Ah (for 24V), with 50A of constant power supply in 12V and 24V mode. In 12V mode, up to 70A of power is automatically available for temporary high loads. Features include battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for reconditioning deeply discharged batteries and a built in temperature sensor for optimised charging.

    • Selectable power supply program for constant voltage output
    • Patented float/pulse maintenance charging
    • Recond function
    • Heavy duty 6m detachable charge cables and clamps
    • LED displays for charging, charge voltage, current, charge time and energy indication
    • Fully automatic 8 step charging
    • Adjustable charge current control for batteries of all size
    • Patented desulphation function
    • Temperature sensor for temp. compensated charging
    • Heavy duty aluminium housing (IP20 classified)
    • Compatible with Pro accessories.
    • Safe spark free operation
    • Reverse polarity protected
    • Short circuit proof
    • 2-year warranty
  • Pro 60

    Professional battery management redefined

    Innovative technology

    The CTEK PRO60 is an innovative and highly efficient 60A battery charger and power supply that’s designed to meet the demands of the modern workshop. With its cutting edge design, advanced technology and state of the art features, it’s the perfect solution for comprehensive battery charging, maintenance and support.

    The CTEK PRO60 restores charge and reconditions batteries using a patented multi step charging process. It’s compatible with all types of 12V battery, including normal wet/flooded, Ca/Ca and Lithium (LiFePO4), as well as AGM and EFB Stop/Start batteries. The PRO60’s ‘adaptive charging’ mode automatically detects the appropriate settings for the battery and applies the optimum settings for the fastest charge. It’s designed to be user friendly with just four buttons and a clear, easy to read LCD display. The PRO60 is also the perfect stable power supply, with 12.6-14.8V available in selectable 0.1V increments. This ensures that no damage can occur to sensitive vehicle electronics.

    • 12V/60A output
    • Variable output in power supply mode (12.6V-14.8V)
    • Compatible with all types of 12V battery, including Lithium (LiFePO4)
    • Suitable for batteries from 10Ah-1800Ah (15Ah-600Ah LiFePO4)
    • Resonant Converter technology for fast and efficient charging
    • Easy to use with clear LCD display
    • Unique, patent applied for ‘adaptive charging’ mode automatically detects battery size
    • Two power supply modes for diagnostic or showroom use
    • Built in temperature compensation
    • Rugged, impact resistant polycarbonate casing
    • 5m cables and heavy duty clamps
    • IP40 rated (indoor use)
    • Safe spark free operation
    • Reverse polarity protected
    • Short circuit proof
    • 2-year warranty