NZD95,00 each

XS 0.8

Compact, powerful 12V set and forget charging

Our smallest 12V charger

The XS 0.8 uses state of the art technology for charging smaller batteries on motorbikes, jet skis, ATVs and lawnmowers.

The XS 0.8 is CTEK’s smallest 12V charger and it’s suitable for charging smaller batteries as well as maintenance charging normal sized car batteries. The XS 0.8 is a compact, fully automatic 6 step charger that delivers 0.8A and charges 12V batteries from 1.2 to 32Ah and maintenance charging up to 80Ah. It’s simple to use and you can follow the whole charging process on the clear, easy to read display.

  • Fully automatic ‘connect and forget’ 6 step charging
  • Patented maintenance charging up to 80Ah for longer life batteries
  • Charges 12V batteries from 1.2-32Ah
  • Patented desulphation function
  • 5-year warranty
NZD535,00 each

SmartPass 120

DC Battery Management System

When you need to charge a large service battery bank or just better manage a situation where a second battery is needed. With an isolated low voltage disconnect circuit, you can ensure essential communication or navigation lights are left running while non-essential equipment is turned off to save the batteries power.

The additional 120A of charging power means battery banks up to 1200Ah can be serviced with the addition of the D250SA solar input is also utilised to ensure maintenance charging is continued during storage or a period of non-use.

NZD445,00 each

SmartPass

More Power while you drive

Fully automated control

SMARTPASS controls and optimises energy and has a built in low voltage disconnect to make sure critical equipment such as radio, emergency lights and navigation systems always function. It’s suitable for boats, service vehicles, camper vans, caravans, RVs and heavy vehicles.

SMARTPASS is a fully automatic power management system for controlling and optimising energy produced by alternators or conventional AC/DC chargers, which is then distributed to battery banks and consumers. It can handle up to 80A for batteries between 28-800Ah and is suitable for all types of 12V battery. It will only charge the house batteries when the DC circuit is being powered from a charging source so you never have to worry about a flat starting battery. When used with the D250S DUAL, SMARTPASS provides optimal charging through CTEK’s unique staged charging cycle to protect your battery.

  • Battery separation eliminates diodes and VSR relays
  • Delivers 80A for quick recharge of batteries 28-500Ah
  • Compatible with DUAL D250S and D250SA and delivers up to 100A charge when matched with either of these two units.
  • Prioritizing critical consumers and supplies consumers directly from the alternator
  • Splash and dust proof (IP65)
  • Suitable for boats, service vehicles, camper vans, caravans, RVs and heavy vehicles
  • Fully automatic
  • Simple to install and use
  • Maximizes battery life
  • Reduced charging times and costs
  • Separates consumers from service batteries for more effective charging
  • Temperature protection for service batteries
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty
NZD2.499,00 each

Pro 60

Professional battery management redefined

Innovative technology

The CTEK PRO60 is an innovative and highly efficient 60A battery charger and power supply that’s designed to meet the demands of the modern workshop. With its cutting edge design, advanced technology and state of the art features, it’s the perfect solution for comprehensive battery charging, maintenance and support.

The CTEK PRO60 restores charge and reconditions batteries using a patented multi step charging process. It’s compatible with all types of 12V battery, including normal wet/flooded, Ca/Ca and Lithium (LiFePO4), as well as AGM and EFB Stop/Start batteries. The PRO60’s ‘adaptive charging’ mode automatically detects the appropriate settings for the battery and applies the optimum settings for the fastest charge. It’s designed to be user friendly with just four buttons and a clear, easy to read LCD display. The PRO60 is also the perfect stable power supply, with 12.6-14.8V available in selectable 0.1V increments. This ensures that no damage can occur to sensitive vehicle electronics.

  • 12V/60A output
  • Variable output in power supply mode (12.6V-14.8V)
  • Compatible with all types of 12V battery, including Lithium (LiFePO4)
  • Suitable for batteries from 10Ah-1800Ah (15Ah-600Ah LiFePO4)
  • Resonant Converter technology for fast and efficient charging
  • Easy to use with clear LCD display
  • Unique, patent applied for ‘adaptive charging’ mode automatically detects battery size
  • Two power supply modes for diagnostic or showroom use
  • Built in temperature compensation
  • Rugged, impact resistant polycarbonate casing
  • 5m cables and heavy duty clamps
  • IP40 rated (indoor use)
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty
NZD1.115,00 each

Off Road Bundle

The ultimate 12V power system for outdoor vehicles

Battery to battery charger in a dual battery application

Enjoy the outdoors for even longer with CTEK’s 100A OFF ROAD CHARGING SYSTEM. It combines the D250S Dual Smart Charger and the SMARTPASS Power Management System for the ultimate 12V power system. Install it in your 4WD, camper trailer or caravan to give you the best performance, power and life from your batteries.

D250S DUAL The D250S DUAL charger can get its energy from alternators, solar panels and wind power. It separates starter and service battery and maximizes the use of the both without risking that the starter battery is unable to start the engine. SMARTPASS SMARTPASS is a Power Management System with under voltage protection that distributes it to the service batteries or electrical equipment. SMARTPASS separates and prioritized between critical and non-critical consumers to avoid drained service battery. SYSTEM MONITOR The System Monitor constantly monitors the voltage and current (charge and discharge) to show you exactly how much charge you have and how many hours you’ve got left before your battery bank is empty.

NZD739,00 each

Off Grid Bundle

Monitored charging to keep you off grid longer

The CTEK 20A OFF GRID CHARGING SYSTEM charges your battery bank while you’re driving to stop it going completely flat so you can spend more time off grid. You can charge it from alternator, solar or wind power and, for complete peace of mind, you can see at a glance how much charge you’ve got left and the length of time till your batteries are discharged.

D250S DUAL The D250S DUAL charger can get its energy from alternators, solar panels and wind power. It separates starter and service battery and maximizes the use of the both without risking that the starter battery is unable to start the engine. SYSTEM MONITOR The System Monitor constantly monitors the voltage and current (charge and discharge) to show you the exact how much charge you have and how many hours you’ve got left before your battery bank is empty.

NZD2.585,00 each

MXTS 70/50

Versatile and Powerful workshop charger

Powerful charging

The MXTS 70/50 is a powerful, state of the art workshop charger developed specifically for all 12V and 24V lead acid batteries, including AGM and EFB Stop/Start types.

The MXTS 70/50 is a fully automatic 8 step charger that delivers selectable 50A/12V or 50A/24V to batteries from 20-1,500Ah (for 12V) and 20-1,500Ah (for 24V), with 50A of constant power supply in 12V and 24V mode. In 12V mode, up to 70A of power is automatically available for temporary high loads. Features include battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for reconditioning deeply discharged batteries and a built in temperature sensor for optimised charging.

  • Selectable power supply program for constant voltage output
  • Patented float/pulse maintenance charging
  • Recond function
  • Heavy duty 6m detachable charge cables and clamps
  • LED displays for charging, charge voltage, current, charge time and energy indication
  • Fully automatic 8 step charging
  • Adjustable charge current control for batteries of all size
  • Patented desulphation function
  • Temperature sensor for temp. compensated charging
  • Heavy duty aluminium housing (IP20 classified)
  • Compatible with Pro accessories.
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty
NZD1.340,00 each

MXTS 40

The all in one 12V and 24V charging station

Fast, multi functional charging

The MXTS 40 is the all in one battery charging, maintenance and support station that’s essential equipment for 12V and 24V vehicle workshops and showrooms. It’s easy to use and electronically safe, with rapid charging for all types of batteries.

The MXTS 40 has both 40A/12V and 20A/24V output, and provides selectable constant voltage settings to avoid ECU damage due to voltage fluctuation during programming. As well as the 8 step charge progress display, the MXTS 40 also has an easy to read OLED display to give you clear readouts of key charge parameters, including current, voltage and amps charged. It has a Recond mode for reconditioning deeply discharged batteries and a temperature sensor for optimised charging regardless of weather conditions. The MXTS 40 has been designed to protect vehicle electronics and is housed in heavy duty polycarbonate for rough environments. It can be used with the optional Wall Hanger Pro and Trolley Pro for secure storage and maximum portability.

  • Charges 12V batteries from 20-1200Ah and Charges 24V batteries from 10 – 600Ah
  • Recond Mode for sulphated battery repair
  • Temperature sensor to compensate for cold conditions
  • Easy to read OLED display
  • Comes with heavy duty clamps and high quality detachable 2.5m charge cables
  • Electronically safe multi step rapid charging
  • 40A/12V and 20A/24V output
  • IP20 classified
  • Safe spark free operation
  • Reverse polarity protected
  • Short circuit proof
  • 2-year warranty
NZD175,00 each

MXS 5.0

Popularity, looks, performance and functionality

When one charger has it all what more can be said?

The MXS 5.0 is the most common battery charger within the CTEK range. It covers all batteries under 100Ah which is most of what the average user will need to charge. The charger has a 0.8A motorcycle mode for small batteries up to 32Ah, a normal charging voltage mode of 14.4V, an AGM mode at 14.7V and a Recond mode at 15.8V. Any two or more combinations can be selected by pressing the MODE button. You can use 0.8A at 14.7V with a Recond (stage 6) or 5A charging at 14.4V by selecting the Car mode only.

So with all the endless options for maintenance charging, fast charging of small batteries and storage charging of larger batteries, desulphation and equalisation this truely is a one stop charging 12V power house that punches well above it's weight.

NZD149,00 each

MXS 3.8

The ideal charger for everyday use

For times when the mechanic can work out the issue - other than the battery

The MXS 3.8 is an advanced battery charger and maintainer. It has selectable programs for use on different sized batteries from the small ride-on lawn mower or motorcycle or jetski then normal mode for larger batteries and charging on cold days, also known as AGM mode.

The MXS 3.8 microprocessor controlled 7 step battery charger and maintainer is suitable for batteries from 1.2Ah-85Ah. Features include battery diagnosis to establish whether your battery can receive and retain a charge and a ‘Snowflake’ program for charging on cold days or to charge AGM batteries like those used in Start/Stop vehicles. The MXS 3.8 uses CTEK’s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods. The MXS 3.8 is simple to use and you can follow the whole charging process on the clear, easy to read display.

  • Fully automatic ‘click and connect’ 7 step charging
  • Smaller battery, normal battery and cold weather programs
  • Charges batteries up to 85A
  • Reverse polarity protected
  • 5-year warranty
NZD765,00 each

MXS 25EC

Workshop Extended Cables

Leads to workshop lead times reduced

The MXS 25EC (Extended Cables) has the same feature at the MXS 25 but with 6 metre long DC power leads so you can place the charger on the drivers or passengers window using the window mounting bracket that's also provided with the charger.

The power supply mode means you can program the ECU at a dealership without a reduction in voltage triggering alerts. All inportant when errors are costly and time is money.

NZD559,00 each

MXS 25

Large power large features small size

When smarter is better and a faster charge

The MXS 25 is the largest professional charger suitable for motorhome or marine. It has user selected modes for normal charging, power supply mode, recondition mode which will stay in the selected mode each time the charger is reconnected to AC mains so no user intervention is required. The unit comes with temp. compensated charging which is good to stop a battery from over-charging in high heat conditions and importantly raising the charging voltage in freezing conditions so the battery achieves full charge in temperatures just above freezing. The charger is IP44 rated and includes a cross ventilation fan so keep it free of obstruction to ensure the fan isn't on for longer than necessary. The 8 stages of charge ensure the battery is kept fully charged and maintained for up to a year without needing attention.

NZD375,00 each

MXS 15

Master in the middle

Midsized Maintainer, service support and conditioner

The CTEK MXS 15 with its Recond Mode, Power Supply and 8 stage charging cycle is ideal for large vehicle workshops, motorhomes and battery banks between the 150Ah to 300Ah. The unit comes with a 2 year warranty and is IP44 rated with an internal fan for cooling.

If you use for extended periods of time a surge protector would be an ideal Christmas stocking gift to ensure a surge or dimming of power didn't damage the sensitive equipment.

NZD375,00 each

MXS 10

Powerful professional charging for workshops

The ultimate charger

The MXS 10 gives you state of the art technology and is ideal for professional use in workshops for caravan, RV, boat and car batteries with remote temp. sensor and power supply mode.

The MXS 10 is a fully automatic 8-step charger that delivers 10A to all types of 12V batteries from 20-200Ah and is also suitable for maintenance charging up to 300Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning sulphated and deeply discharged batteries, a winter program for charging in cold weather which is also the AGM option which maximises the performance life of most Stop/Start batteries. The MXS 10 also has a temperature sensor for optimised charging and it can even be used as a power supply source for 12V equipment.

  • Fully automatic ‘connect and forget’ 8 step charging
  • Charges batteries from 20-200Ah
  • Temperature sensor, AGM and Recond programs
  • Power supply for 12V equipment
  • 2-year warranty
NZD509,00 each

M300

The ideal choice for larger battery systems

Compact, tough and powerful

The M300 is recommended for those who need quick and effective charging for larger service batteries.

The 12V, 25A M300 is the ideal choice for recovery charging and maintaining all types of batteries from 40Ah to 260Ah or maintenance charging up to 500Ah. It has a range of functions, including a Recond mode for reconditioning deeply discharged batteries or equalising, and a temperature sensor which optimises the charge if the temperature deviates from +25ºC. It also has a special Silent Night mode which reduces the noise of the fan by lowering the output power during periods of low energy consumption, such as at night. The M300 comes with a long 4m cable with eyelets for easy installation into a wired/integrated solution.

  • Charges and maintains batteries from 40Ah up to 500Ah.
  • Recond program for deeply discharged batteries
  • Analysis step to check if battery can hold its charge
  • Temperature compensated
  • Short circuit proof
  • Compact tough design
  • Silent Night mode
  • IP44 rated, making it suitable for outdoor use
  • Safe spark free operation
  • 5-year warranty
NZD375,00 each

M200

The perfect charger for all boat owners

Quiet and flexible

The M200 charges a wide range of marine batteries quickly and effectively.

The M200 is the perfect 15A battery charger for all boat owners. It has a range of functions, including a Recond mode for reconditioning deeply discharged batteries including Wet and Ca/Ca, and a temperature sensor which optimises the charge if the temperature deviates from +25ºC. It also has a special Silent Night mode which reduces the noise of the fan by lowering the output power during periods of low energy consumption, such as at night. This mode automatically turns off after 8 hours to resume normal charging. The M200 comes with a long 4m cable with eyelets for easy installation on your boat or in your selected application.

  • Charges batteries from 28Ah up to 300Ah and maintains larger batteries up to 500Ah
  • Recond program for deeply discharged batteries or to equalise batteries in a string
  • Analysis step to check if battery can hold its charge (a sign of reduced capacity)
  • Temperature compensated
  • Short circuit proof
  • Compact tough design
  • Silent Night mode
  • IP44 rated, making it suitable for outdoor use in dry conditions
  • Safe spark free operation
  • 5-year warranty
NZD299,00 each

M100

The all in one charger and power supply

Flexible charging

The smart and flexible M100 is perfect for tough marine environments as well as workshop or automotive uses..

The M100 8 step 12V battery charger and maintainer can utilise the wide range of accessories from CTEK but comes with M10 eyelets as a point of difference from the MXS 7.0 which is essentially the same model. Its three selectable program modes make it suitable for use with 14-225Ah batteries and AGM batteries, and it can automatically detect whether your battery is near the end of its life. The M100 also has a Recond mode for reconditioning deeply discharged batteries and it can even be used as a 12V supply source, for example if you need to remove the battery without losing your settings or power an LED without a battery connected.

  • Charges batteries between 14-150Ah and up to 225Ah for maintenance charging
  • Temperature compensated charging via external temp sensor integrated into DC cable
  • Three programs – Normal, AGM and Recond
  • Can also be used as a 12V power source to protect electrical settings
  • Compact tough design
  • Fully automatic 8 step charging for maximum performance and extended life
  • Splash proof and dust proof (IP65)
  • Safe spark free operation
  • Short circuit proof
  • Reverse polarity protection
  • 5-year warranty

 

NZD499,00 each

D250SA

Euro Performance Upgraded

The latest from CTEK the D250SA leverages on the good foundation of the D250S Dual but raises the stakes again by including an ignition feed to only take energy from the start battery when the vehicle is running. An additional feature allows setting of bulk charging voltages at either 14.4V or 14.7V. A wider input voltage range on the alternator side for Euro 5+ engine for ECU controlled systems.

A wider input voltage range on the alternator input side for Euro 5+ engine for ECU controlled systems allows for forced charging of the service batteries to optimise the engine output and generate charging power.

MPPT Solar input, alternator input with service battery charging from the solar or engine with a preference on the suns free energy. Not to mention the ability to add the SmartPass or SmartPass 120 for an additional 80A or 120A charging output.

NZD499,00 each

D250S Dual

CTEK the standard for DC t0 DC charging

If you need a dual battery setup look no further

The D250S Dual is what we call a DC to DC charging system. In this case with dual inputs, one from solar and one from an alternator. The solar input is up to 22VDC @ 25A, this outputs through the 20A 5 stage charging output profile and is considered the master input. The second input is from a vehicle's alternator which typically is supplying a voltage suited to the engine's management system or starting battery. Its almost never the correct charging voltage for what could be a flat house bank in the rear of the vehicle where the voltage drop over 3-5 metres could be 1 volt. This unit installed in the rear with the house batteries will ramp up the voltage to what's needed for the house battery to keep it well maintained at up to 20A, this is the slave input. By that we mean if you are in the sun the solar has priority charge of say 5A so that the engine doesn't need to work as hard to provide power for the other 15A that could be charging of the house batteries were flat. 

If you have a newer Euro 5+ vehicle then you should consider reviewing the latest release from CTEK the D250SA with its ignition feed and wider operating alternator input voltages. 

NZD215,00 each

CT5 Time To Go

Set and Forget Charging with convenient countdown

The CT5 range of chargers resets the level of convenience in charging. Rather than telling you the stage you are at this model attacks from the other perspective of time. The progressive LED's tell you how long till the charging is finished. That's great if you need to get going after a flat battery. Or are needing to know when you can use the vehicle, or in a workshop senario need to know which vehicle will be ready to service first.

This Time to Go still has the patented CTEK 8 stage charging profile, convenient small size, IP rated housing, comfort plugs to utilise any of the charging accessories but none of the user manual reading to understand which modes do what, when will the battery be ready. How long will the charge take.

All these features with the 5 year warranty and CTEK's reputation and backing make this a perfect choice for those of us that take our car to a dealership for servicing. When you don't have time or don't care to understand charging. That's just fine, this charger will pretty much do it all for you. Connect it up, turn the mains power on and the charger will do the rest.

NZD173,00 each

CT5 Start Stop

Peak EFB and AGM technology for your START/STOP vehicle

Fast charging for your vehicle with engine Start/Stop features

The CT5 START/STOP battery charger and maintainer has been specially designed to charge and maintain batteries in Start/Stop vehicles and being a set and forget charger it makes it perfect for those that don't want to know how it works just that it does.

Start/Stop technology is great for the environment but it can put a considerable strain on your battery, especially if it’s in an older car. By keeping the battery fully charged, you can take full advantage of all the Start/Stop technology benefits, such as better fuel efficiency and lower CO2 emissions. If you only make short journeys, use the CT5 START/STOP once a month to keep your battery in peak condition. And if you’re going away on holiday, just connect the charger to the battery to make sure your car’s ready to go when you return.

  • Fully optimized for cars with Start/Stop technology, e.g. AGM and EFB batteries
  • No buttons to press – fully automatic charging
  • 5-year warranty
  • Simple to use with an easy to understand display
  • Reverse polarity protected
Add to cart