Where the rubber meets the road

With a CTEK Bumper you can help protect your charger from falls. Much like a cellphone protector it's designed to take the harsh knocks so the charger housing remains unscratched and in top condition. Made from durable silicon rubber, the bumper fits snugly round the body of your charger for extra grip on slippery surfaces. The Bumper

The CTEK Analyser is manufactured by Midtronics which are highly regarded as the worlds best algorithm for performing a conductance test on batteries to ascertain the health of a battery. The units are self-powered by the battery they are testing and show a calculated CCA rating which you check against the manufacturer's spec. If the value is 80% or lower of new then it is deemed end of life.

Powerful professional charging for workshops

The ultimate charger

The MXS 10 gives you state of the art technology and is ideal for professional use in workshops for caravan, RV, boat and car batteries with remote temp. sensor and power supply mode.

The MXS 10 is a fully automatic 8-step

THIS PRODUCT IS NOW END OF LINE AND HAS BEEN REPLACED BY THE PRO15S

Master in the middle

Midsized Maintainer, service support and conditioner

The CTEK MXS 15 with its Recond Mode, Power Supply and 8 stage charging cycle is ideal for large vehicle workshops, motorhomes and battery

THIS PRODUCT IS NOW END OF LINE AND HAS BEEN REPLACED BY THE PRO25S 

Large power large features small size

When smarter is better and a faster charge

The MXS 25 is the largest professional charger suitable for motorhome or marine. It has user-selected modes for normal charging,

THIS MODEL IS NOW END OF LINE WITH NO REPLACEMENT FOR AU/NZ

Workshop Extended Cables

Leads to workshop lead times reduced

The MXS 25EC (Extended Cables) has the same feature at the MXS 25 but with 6 metre long DC power leads so you can place the charger on the drivers or passengers window

Professional 24V battery charging

The ideal 24V solution

The MXT 14 is designed for batteries that are put under a lot of strain, making it ideal for commercial vehicles, buses, trucks, access equipment and workshops.

The MXT 14 professional 8 step 24V battery charger delivers 14A to 24V

The all in one 12V and 24V charging station

Fast, multi functional charging

The MXTS 40 is the all in one battery charging, maintenance and support station that’s essential equipment for 12V and 24V vehicle workshops and showrooms. It’s easy to use and electronically safe, with rapid charging for

Versatile and Powerful workshop charger

Powerful charging

The MXTS 70/50 is a powerful, state of the art workshop charger developed specifically for all 12V and 24V lead acid batteries, including AGM and EFB Stop/Start types.

The MXTS 70/50 is a fully automatic 8 step charger that delivers

CTEK powered by Midtronics. Art. No. 40-209 CCA Results Tester.

Element 82 is a distributor and service agent for Midtronics conductance testers so we can match your needs from a small workshop to factory dealerships with PBT, MDX, EXP, SCP models to name a few.

The CT Analyser is from the PBT range and represents great value in providing a CCA test result for instant

The CTEK Trolley Pro has 3 surface areas to place, mount or sit your workshop equipment. The swivel and large rolling diameter wheels allow for easy maneuverability through the workshop. The top and bottom surfaces are rubber mounted to help protect equipment and supply a non-slip surface for a laptop (top) and tools (bottom). The pre-drilled angled mounting plate provides a surface for 2 x

Extreme Power Battery Management

High Power Advanced Technology

The CTEK PRO120 is an innovative and highly efficient 120A battery charger and power supply that’s designed to meet the demands of the diagnostic workshop. With its cutting-edge design, advanced technology and state of the art

The PRO15S is a powerful and fully automatic 15A battery charger and maintainer, compatible with any 12V battery, including Lithium-Ion (LiFePO4). Safe, strong & robust, it can handle heat, dust & humidity. Combining fast and powerful charging with long-term maintenance capability, the PRO15S is the ideal charger for the workshop, the car, the caravan or the

Highly efficient 25A battery charger & power supply

For everyday professional use

The PRO25S is an innovative, versatile and highly efficient 25A battery charger and power supply, designed around the needs of the automotive professional. Combining power & advanced technology with safety,

Professional battery management redefined

Innovative technology

The CTEK PRO60 is an innovative and highly efficient 60A battery charger and power supply that’s designed to meet the demands of the modern workshop. With its cutting edge design, advanced technology and state of the art features, it’s

The adaptor replaces the Trolley angled mounting plate with a table-like surface which the charger is mounted onto the fastening can hold either the Pro 60 or the Pro 120 chargers as pictured.